After-sales Service: | on Line Technical Support |
---|---|
Warranty: | One Year |
Type: | Sweep and Suck Type |
Certification: | ISO9000, CCC |
Transmission Type: | Manual |
Emission Standard: | Euro 2 Euro 3 Euro 4 Euro 5 |
Suppliers with verified business licenses
Vehicle Model | CL5120TXS6GH Washing and sweeping car | Chassis model | EQ1125SJ8CDC | ||||
Total mass | 11995kg | Curb weight(Kg) | 7400kg | ||||
Rated contained mass | 4400kg | Wheelbase | 38 00mm | ||||
Fresh water tank capacity | 4m³ | Trash bin capacity | 5m³ (stainless steel) | ||||
Tire model | 245/70R19.5, 8.25R20 | Cleaning width(mm) | 2800-3200 | ||||
Emission Standards | GB3847-2005, GB17691-2018 National VI | ||||||
Vehicle length, width and height | 7000*2200*2700mm | ||||||
Engine main engine | Chassis engine model | Yunnei D25TCIF1, Yuchai YCY30165-60 (optional) | |||||
Horsepower (ps) | Yunnei 150, Yuchai 165 | ||||||
Displacement(ml) | Yunnei 2499, Yuchai 2970 | ||||||
Engine auxiliary machine |
Clean engine models and manufacturers | B140 33 Dongfeng Cummins Co., Ltd. | |||||
Power(kw) | 102 | Horsepower (ps) | 140 | ||||
Displacement(ml) | 3200 | ||||||
Special performance parameters | Cleaning speed (km/h) | 3-15 | Cleaning operation speed | 15-20km/h | |||
Maximum cleaning capacity (m²/h) | 38000 | Density(g/cm³) | 2.0 | ||||
Cleaning width MM | 3000 | Suction particle size | ≥100mm | ||||
Dumping angle of garbage compartment | ≥45° | Cleaning efficiency | ≥96% | ||||
Operation noise (db) | <88 in accordance with GB7258 | ||||||
Cleaning system | Type | Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is arranged at symmetrical positions on both sides of the frame. The sweeping disc is driven by a hydraulic motor and the speed is adjustable. | |||||
Main components | Sweep disc bracket, sweep disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc. | ||||||
Brush opening diameter (mm) | φ800-900 | Sweep motor speed | 140r/min | ||||
Number of disks scanned | 2 | Sweep disc tilt adjustment | Forward tilt 5°~15° Outward tilt 5°~10° |
||||
Suction nozzle device | Type | The suction nozzle is suspended between the rear wheels of the chassis, and consists of a suction nozzle, roller, and suction pipe. The suction nozzle body can move with the road surface. The suction nozzle lifting is controlled by a cylinder. The suction nozzle has a double suction mouth and a wide suction nozzle. It has a long spray bar with high-pressure nozzles ( 8 nozzles ) built in. The suction nozzle body moves with the road surface. The hydraulic drive and electrical automatic control of the suction nozzle lifting are spring floating suspension. | |||||
Straw diameter mm | φ180 | Straw brand | NORRES | ||||
Travel wheel bearings | SKF | Wear-resistant outer ring of travel wheel | Stellana | ||||
Ground clearance of the rigid part of the nozzle in working state | 5~8(mm) | ||||||
Nozzle and straw wind speed | 50 ~ 65(m/s) | Nozzle negative pressure | 380 (mmH2O) | ||||
Other Configuration | alarm system | Reversing voice alarm system | |||||
Sub-operating system | The tail is equipped with an electronically controlled operating system to control the lifting of the cabin and the opening and closing of the rear door, avoiding safety accidents caused by the user operating in the cab and not being able to observe the situation behind. The tail can also operate operating functions. | ||||||
Hand Pump Emergency Lift System | If the hydraulic system cannot be used due to auxiliary engine failure, and the sweeping brush, suction cup and large compartment cannot be raised or lowered, the manual pump emergency lifting system can be used to operate. |
Suppliers with verified business licenses